|
 Pipe-Label™
enables users to clearly mark plumbing, fluid, and HVAC
systems for easy, safe and efficient operation. Its
PVC construction makes it water-proof, tough, noncorrosive,
nonconductive and chemical resistant. Its vinyl labels
are waterproof and chemical-resistant. No tools are
necessary for installation. Installation is a snap!
USES:
Residential plumbing, solar and HVAC systems can be
marked for convenient use. Industrial, commercial and
maritime systems can be labeled for speed, safety, and
increased profit. It enables users to clearly specify
step by step instructions for each feature or function.
It overcomes lack of familiarity and loss of knowledge
from intermittent use or employee turnover.
|
PROBLEMS:
Where is that line buried? How do I operate the solar
system? Which line goes to which HVAC unit? What unit
is does drip line serve? What happened to the hand written
notes on the pipe? I could read them last time. Where
is the well located? What is the source of water in this
line? Is the water potable? Non-potable reclaimed water?
What zone? What GPM?
|
SOLUTION:
The Pipe-Label™ product line clearly labels fluid
systems. Anyone can operate the system by reference to
the instructions on the SnapMarkers®.
Its waterproof vinyl labels will not wash off or rub off.
|
|
|
|
 |
|
|
Typical
residential plumbing uses include:
- how
to operate, drain, or by-pass solar systems
- the
purpose of a valve
- the
course a line takes
- whether
water is potable or non-potable
- whether
a line feeds an upstairs unit or downstairs unit
- which
unit a condensate line drains from
Typical
plumbing applications industrial, commercial, and maritime
settings include:
- fire
suppression sprinkler systems
- location
of emergency shut off
- indicate
whether a spigot or other discharge point dispenses
well water, city water, or re-claimed water
- which
water supply line feeds which area
- valve
interaction with other valves (cautions, instructions,
relationships)
- when
or how to use a valve
- what
a valve or switch does
- pipe
or conduit paths
- pipe
or conduit origins
- system
inspections and approvals
- which
unit a line feeds
- operational
steps for complex multi-step systems
- system
steps required for integrated operation among several
components of a more complex system
- how
to operate, drain, or by-pass solar and HVAC systems,
including glycol mixing stations
- the
purpose of a valve or switch
- the
course a line takes or where it is located
- which
zone a line is part of
- whether
water is potable or non-potable
- the
flow direction in a line
- conditions
of a manual shut off
- who
to call for service or repair
|
| PRODUCT
INFORMATION |
| Color(s) |
Gray,
White, Black |
| Label
Plate™ Size(s) |
1.33"
wide, including curved edges (flat label area is 1.25")
2.33"
high, including curved edges (flat label area is 2.25")
|
| Fits
Pipe, Sizes (O. D.) |
1/2",
3/4", 1" |
| Special
Usage Note |
Fits
all pipe of equal O.D. specification, regardless of material
and schedule. Fits both thin-wall irrigation and schedule
40 PVC. |
| Fittings
and Accessories |
n/a
|
|
|
|
|
